dual shear selector rod - late style 2002 Replacement/Upgrade This is a dual-shear-selector rod for your 4-speed 2002 (03/1974-1976). Similar to what was used on the DTM cars, this selector rod offers a tighter shift by spreading the torsional force on both sides of the selector rod. A tighter selector rod means a tighter shift lever, eliminating slop found in the stock single-shear selector rod. While there are a few dual shear selector rods on the market, ours is a simple but effective design without needlessly high manufacturing costs. Made right here in Southern California from Stainless Steel (NOT soft threaded aluminum). Not compatible with engine swaps. ** IMPORTANT NOTE if you have an early car (any '02 prior to 03/74). Your car was cursed with a less-than-ideal shifting mechanism and this DSSR will not work as is. We highly recommend updating the shifting mechanism using the following parts: -this selector rod. -a lever from a later 2002 (or our "short shift lever"). -our selector rod joint and pin. If you are not sure if your car has already been updated, you can check very easily when under your car. The early-style shifter had a linkage that attached to the shift lever via a dowel pin and set screw. Price: $74.19   Quantity to Add:   CONTACT US AT BMWSALES@2002AD.COM 1-800-4-2002AD 909-629-1955 outside of the USA COPYRIGHT © 2002 AD, ALL RIGHTS RESERVED.